Tension Monitoring System - TELC - ELECTROMATIC Equipment Co., Inc.

Low Cost Tension Monitoring System

TELC System
TELC Sensor plus TD-1-TE Indicator

Accurately measures the running line tensions of yarns, fibers, wires, cables, films & similar process materials - continuously!

The TELC System detects "out of tolerance" conditions and immediately alerts operating personnel. This enables them to take the appropriate corrective action to maintain the highest product quality.

Additionally, the TELC Tension Sensor can be installed separately, as part of a user-supplied control-loop system.

Precision strain gauge accuracy of ± 1.5% or better

User-set high & low alarm limits with relays for alerting operating personnel of "out of tolerance" conditions

Analog output for recording and control purposes

V-grooved rollers rated for speeds up to 2000 m/min are standard or, optionally, 3500 m/min (option K) or 5000 m/min (option HS)

Built-in electronic damping to filter out fluctuating tension readings

.Tapes/Films & Tows

Type RX
Uses 7, 10, 15, 20 or 30 mm wide cylindrical rollers for "strip" materials. Wider materials can be accommodated with other models.

.Heavy-Duty Model

Type 24
Uses 30mm diameter hardened steel rollers for heavy wires, cable tire cord and similar process materials subjected to high impact loads

Custom sensor designs can be developed to meet specific applications requirements. Inquire.

TELC
Tension Ranges	0-100 g, 0-200 g, 0-500 g, 0-1 Kg, 0-2 Kg, 0-5 Kg, 0-10 Kg,	Output (Optional)	0-10 V DC, 4-20 mA, RS-232 or RS-485 (Addressable)
Accuracy	±1.5% or better	Frequency Response	50 Hz
Power Required	+ 15 V DC, regulated (20 mA)	Outer Roller Spacing	40-200 mm, depending upon tension range, process material and application
Deflection	0.5 mm maximum	Operating Temperature	40 to 105° F (5-40° C)
Output (Standard)	0-1 V DC	Operating Temperature	40 to 105° F (5-40° C)
TD-1-TE Indicator
Display Range	1-1999 (user-set decimal point)	Panel Cutout	92 x 44 mm
Digital Display	3-1/2 Digit LED (14.4 mm high)	Dimensions	3.78" L x 1.89" H x 4.04" D (96 x 48 x 103 mm)
Power Required	115/230 V AC (user-configured)	Dimensions	3.78" L x 1.89" H x 4.04" D (96 x 48 x 103 mm)
Sensor Power	Provides +15 V DC, regulated	Relay Operation	Hi-LO or Hi-Hi/HI
Analog Output	4-20 mA or 0-10 V DC	Relay Rating	1 Amp @ 250 VAC/30 V DC, resistive load, normally open
Frequency Response	1 Hz (with damping filter) 40 Hz (without damping filter)	Relay Rating	1 Amp @ 250 VAC/30 V DC, resistive load, normally open